EPA’s new renovation rules are tough – Into Effect April 22
The new rules going into effect on April 22 regarding lead-safe work practices in pre-1978 properties are anything but simple, low-cost or common sense. Yet that is exactly what a U.S. Environmental Protection Agency (EPA) spokesman said. Quoting the spokesman: “The rule provides simple, low-cost, common-sense steps contractors can take during their work to protect children and families.”
Here’s proof the rules are neither simple nor common sense. The National Apartment Association, a group representing the interests of rental property owners, summarized the new rules on its website saying “properties with no children occupying them are exempt” from the rules.
That’s not true. Even a national organization got it wrong.
To be precise (read carefully): Only owners who plan to have work done on the unit they reside in can “opt out” of the rules, and then only if there are no children under age six and no pregnant women in the unit and no child-care facility anywhere on the premises.
You got that, right? You didn’t have to read it twice, right?
And furthermore, the EPA plans to remove this “opt out” provision in the future. Nice. Now we have to keep up on the latest rule changes.
The bottom line for landlords: All rental units and common areas must be done under the new rules regardless of whether or not children are present. The reason is that children may later reside at or visit the rental units in question.
Simple? Not if you have to read a rule twice and you still don’t get it. Low-cost? Not if you have to deliver a “Renovate Right” pamphlet to the owner ahead of time, return again for an “opt out” signature and keep the signed document for three years. Common sense? Not when it’s created by pencil-pushing bureaucrats!
The Course
The course was six hours of lecture and two hours of “hands-on” practice, ending with a multiple-choice, closed-book test. He passed. The eight-hour course costs $200 or more.
The textbook is ¾ of an inch thick, half of it consisting of appendices and the other half reviewed page by page during the course. Obviously, an instructor could not repeat everything on every page in six hours, nor could the contractors read every word during the lecturing. In conclusion that to follow the lead-safe work practices correctly will require going slowly and re-reading the requirements at the start of the first few jobs.
The rules are not impossible to follow, but it is likely that contractors will forget some rules, deliberately skip over others and take a while to get them all straight.
See summary of the rules below.
RRP rule summarized
RRP = “Renovation, Repair and Painting”
The following is a summary of the new “Renovation, Repair and Painting” (RRP) rules, to give you an idea of what you or your contractor must do and a hint of how much it will increase the cost of jobs on your property.
The general rules
All work on pre-1978 housing that disturbs six square feet or more of interior paint or 20 square feet or more of exterior paint is covered by the new rules unless an inspection by a licensed inspector or risk assessor shows that the specific work surfaces do not contain lead paint. In other words, without a lead inspection, one must assume that all surfaces contain lead paint. One might be able to use an EPA-approved lead test kit to test for lead paint, but only one such kit has been approved so far, it must be mail-ordered and it may not be approved for Massachusetts. Not convenient at all.
Besides the “opt-out” provision described above, all pre-1978 housing is covered except when an owner works on their own unit or a tenant works on their own unit.
At least one worker on a job must be a certified lead-safe renovator, who can train noncertified workers on the job site in lead-safe work practices. This rule is likely to change, requiring a certified lead-safe renovator on site at all times.
Firms must also be certified by the EPA. It’s mostly simple but costly. It consists of promising under threat of heavy fines to use lead-safe work practices – and a check for $300 to the EPA. What’s complicated is figuring out if you are a firm. If you are doing all the work yourself on property you reside in, you do not need to be “firm-certified.” But if you are working yourself on property you own and make income from, you are considered a firm. Contractors with workers are obviously firms.
All work requiring lead-safe work practices must be done by certified firms using certified renovators.
Fines for individuals or firms go up to $37,500 per violation per day. That’s a new amount. The old amount was $32,500. Another rule change.
Occupant education
No more than 60 days and no less than seven days before any work begins, the certified renovator must distribute to all affected occupants the pamphlet entitled “Renovate Right.” This pamplet tells occupants what’s dangerous about lead and what to expect during the job. A signature must be obtained affirming that the pamphlet was received by each occupant. There is a procedure if the occupant refuses to sign.
Decision logic charts
Apparently with a goal to make things simpler for renovators, the certification course includes eight full-page “decision logic charts” to guide decision-making. Each chart contains boxes connected by “yes” and “no” arrows. Inside the boxes are lists, often long lists, of the conditions required to make each decision. You read the boxes and follow the arrows page after page to your final decision. It’s not simple.
Containing lead dust
The basic concern is to minimize and contain lead dust generated at a work site, to protect workers, the occupants and the premises.
For interior work, ss many possessions as possible are removed from the work area. The rest, like pianos, must be covered with plastic duct-taped to the floor.
The work area is sealed off from the rest of the house using heavy-duty plastic and tape to cover floors, doors and air ducts. A special double-flap plastic entryway is made on site for workers to enter and leave without bringing dust with them. Pre-engineered containment systems are recommended to help contain dust better.
Occupants are warned by signs posted before work begins to stay out of and away from the work area. Workers are suited up in special full-body coveralls with hoods or painter’s hats and with HEPA-filtered face masks, rubber gloves and shoe covers. Like spacemen. Workers need to wash their hands and faces frequently, dispose of their coveralls at the end of each day, vacuum their clothes and shoes, and shower when they get home – each day. No one can eat, drink or smoke in the work area. The work area needs to be cleaned frequently and at least daily.
All tools and ladders brought into the work area must be cleaned before they go out. All demolition debris must be wrapped and taped in plastic before being removed from the work area and disposed of. When plastic bags are used for debris, they must be closed using a HEPA-filtered vacuum cleaner to suck out any lead-dust-contaminated air in the bag, then taped shut with a “goose-neck” seal.
All this is for interior work. Similar rules apply to exterior work.
What you can & can’t do
You can’t use an open-flame torch to remove paint nor a heat gun above 1100 degrees Fahrenheit. These tools generate lead-contaminated vapors that are especially dangerous. Power sanding, grinding, planing, cutting (all power saws) or blasting are prohibited unless the power tool has a HEPA vacuum attachment.
What you can and must do is spray all work surfaces with water prior to sanding, scraping, drilling or cutting. Framing, door and window mouldings and other building components must be pried and pulled apart instead of pounded and hammered. Paint on components should be scored with a utility knife before pulling them apart. Since hand-sanding and scraping is slow, new power tools with HEPA vacuum attachments will probably have to be purchased by workers and contractors.
Cleaning up
Besides ongoing cleaning during the work process and at the end of each day, a final, thorough cleaning must be done at the end of the job. The final cleaning starts at the farthest-away corner and at the top of the wall, working towards the exit door of the work area. Walls are cleaned top to bottom with a HEPA vacuum or a damp cloth changed frequently. Floors are cleaned last with a wet mop.
After cleaning, the work area is visually inspected for any leftover dust by the official certified renovator assigned to the job. Any visible dust triggers another cleaning.
The certified renovator then does a “cleaning verification” wipe test on all horizontal surfaces (window sills, countertops and floors), using clean wet disposable wipes to wipe down up to 40 square feet of surface area before changing to a new wipe cloth. Each wipe cloth is compared to a “cleaning verification” card – a photograph of a used wipe. If the job-site wipe is whiter than the photograph, the job site passes the cleaning verification inspection. If the wipe is darker, the job site fails and must be cleaned again.
In some cases, an independent certified lead inspector or risk assessor must do the wipe testing.
Paperwork
Posted at the job site must be warning signs, copies of the certified firm’s and certified renovator’s certificates as well as written documentation that non-certified workers were trained by the certified renovator. This jobsite paperwork must be saved for three years.
Besides the above, the following written documents must also be saved for each job for three years: designation of a certified renovator to the specific job; information on the use and results of EPA-approved lead test kits to determine which surfaces have lead; any official lead inspections; proof of the pre-renovation education of the owner or occupants (handing out the “Renovate Right” pamphlet); any “opt-out” certification by the owner or occupant, if allowed; and any other signed and dated documents, such as contracts, regarding the job.
This paperwork requirement may be the way that the EPA traps property owners for violations of the new rules. If you don’t keep the paperwork or don’t have it, there’s no proof you followed the rules. That’s a $37,500 fine per violation per day!
__________________
If you would like the chance to work with me or one of my fellow real estate investor coaches and our advanced training programs, give us a call anytime to see if Dean's Real Estate Success Academy and our customized curriculum is a fit for you. Call us at 1-877-219-1474 ext. 125
The new rules going into effect on April 22 regarding lead-safe work practices in pre-1978 properties are anything but simple, low-cost or common sense. Yet that is exactly what a U.S. Environmental Protection Agency (EPA) spokesman said. Quoting the spokesman: “The rule provides simple, low-cost, common-sense steps contractors can take during their work to protect children and families.”
Here’s proof the rules are neither simple nor common sense. The National Apartment Association, a group representing the interests of rental property owners, summarized the new rules on its website saying “properties with no children occupying them are exempt” from the rules.
That’s not true. Even a national organization got it wrong.
To be precise (read carefully): Only owners who plan to have work done on the unit they reside in can “opt out” of the rules, and then only if there are no children under age six and no pregnant women in the unit and no child-care facility anywhere on the premises.
You got that, right? You didn’t have to read it twice, right?
And furthermore, the EPA plans to remove this “opt out” provision in the future. Nice. Now we have to keep up on the latest rule changes.
The bottom line for landlords: All rental units and common areas must be done under the new rules regardless of whether or not children are present. The reason is that children may later reside at or visit the rental units in question.
Simple? Not if you have to read a rule twice and you still don’t get it. Low-cost? Not if you have to deliver a “Renovate Right” pamphlet to the owner ahead of time, return again for an “opt out” signature and keep the signed document for three years. Common sense? Not when it’s created by pencil-pushing bureaucrats!
The Course
The course was six hours of lecture and two hours of “hands-on” practice, ending with a multiple-choice, closed-book test. He passed. The eight-hour course costs $200 or more.
The textbook is ¾ of an inch thick, half of it consisting of appendices and the other half reviewed page by page during the course. Obviously, an instructor could not repeat everything on every page in six hours, nor could the contractors read every word during the lecturing. In conclusion that to follow the lead-safe work practices correctly will require going slowly and re-reading the requirements at the start of the first few jobs.
The rules are not impossible to follow, but it is likely that contractors will forget some rules, deliberately skip over others and take a while to get them all straight.
See summary of the rules below.
RRP rule summarized
RRP = “Renovation, Repair and Painting”
The following is a summary of the new “Renovation, Repair and Painting” (RRP) rules, to give you an idea of what you or your contractor must do and a hint of how much it will increase the cost of jobs on your property.
The general rules
All work on pre-1978 housing that disturbs six square feet or more of interior paint or 20 square feet or more of exterior paint is covered by the new rules unless an inspection by a licensed inspector or risk assessor shows that the specific work surfaces do not contain lead paint. In other words, without a lead inspection, one must assume that all surfaces contain lead paint. One might be able to use an EPA-approved lead test kit to test for lead paint, but only one such kit has been approved so far, it must be mail-ordered and it may not be approved for Massachusetts. Not convenient at all.
Besides the “opt-out” provision described above, all pre-1978 housing is covered except when an owner works on their own unit or a tenant works on their own unit.
At least one worker on a job must be a certified lead-safe renovator, who can train noncertified workers on the job site in lead-safe work practices. This rule is likely to change, requiring a certified lead-safe renovator on site at all times.
Firms must also be certified by the EPA. It’s mostly simple but costly. It consists of promising under threat of heavy fines to use lead-safe work practices – and a check for $300 to the EPA. What’s complicated is figuring out if you are a firm. If you are doing all the work yourself on property you reside in, you do not need to be “firm-certified.” But if you are working yourself on property you own and make income from, you are considered a firm. Contractors with workers are obviously firms.
All work requiring lead-safe work practices must be done by certified firms using certified renovators.
Fines for individuals or firms go up to $37,500 per violation per day. That’s a new amount. The old amount was $32,500. Another rule change.
Occupant education
No more than 60 days and no less than seven days before any work begins, the certified renovator must distribute to all affected occupants the pamphlet entitled “Renovate Right.” This pamplet tells occupants what’s dangerous about lead and what to expect during the job. A signature must be obtained affirming that the pamphlet was received by each occupant. There is a procedure if the occupant refuses to sign.
Decision logic charts
Apparently with a goal to make things simpler for renovators, the certification course includes eight full-page “decision logic charts” to guide decision-making. Each chart contains boxes connected by “yes” and “no” arrows. Inside the boxes are lists, often long lists, of the conditions required to make each decision. You read the boxes and follow the arrows page after page to your final decision. It’s not simple.
Containing lead dust
The basic concern is to minimize and contain lead dust generated at a work site, to protect workers, the occupants and the premises.
For interior work, ss many possessions as possible are removed from the work area. The rest, like pianos, must be covered with plastic duct-taped to the floor.
The work area is sealed off from the rest of the house using heavy-duty plastic and tape to cover floors, doors and air ducts. A special double-flap plastic entryway is made on site for workers to enter and leave without bringing dust with them. Pre-engineered containment systems are recommended to help contain dust better.
Occupants are warned by signs posted before work begins to stay out of and away from the work area. Workers are suited up in special full-body coveralls with hoods or painter’s hats and with HEPA-filtered face masks, rubber gloves and shoe covers. Like spacemen. Workers need to wash their hands and faces frequently, dispose of their coveralls at the end of each day, vacuum their clothes and shoes, and shower when they get home – each day. No one can eat, drink or smoke in the work area. The work area needs to be cleaned frequently and at least daily.
All tools and ladders brought into the work area must be cleaned before they go out. All demolition debris must be wrapped and taped in plastic before being removed from the work area and disposed of. When plastic bags are used for debris, they must be closed using a HEPA-filtered vacuum cleaner to suck out any lead-dust-contaminated air in the bag, then taped shut with a “goose-neck” seal.
All this is for interior work. Similar rules apply to exterior work.
What you can & can’t do
You can’t use an open-flame torch to remove paint nor a heat gun above 1100 degrees Fahrenheit. These tools generate lead-contaminated vapors that are especially dangerous. Power sanding, grinding, planing, cutting (all power saws) or blasting are prohibited unless the power tool has a HEPA vacuum attachment.
What you can and must do is spray all work surfaces with water prior to sanding, scraping, drilling or cutting. Framing, door and window mouldings and other building components must be pried and pulled apart instead of pounded and hammered. Paint on components should be scored with a utility knife before pulling them apart. Since hand-sanding and scraping is slow, new power tools with HEPA vacuum attachments will probably have to be purchased by workers and contractors.
Cleaning up
Besides ongoing cleaning during the work process and at the end of each day, a final, thorough cleaning must be done at the end of the job. The final cleaning starts at the farthest-away corner and at the top of the wall, working towards the exit door of the work area. Walls are cleaned top to bottom with a HEPA vacuum or a damp cloth changed frequently. Floors are cleaned last with a wet mop.
After cleaning, the work area is visually inspected for any leftover dust by the official certified renovator assigned to the job. Any visible dust triggers another cleaning.
The certified renovator then does a “cleaning verification” wipe test on all horizontal surfaces (window sills, countertops and floors), using clean wet disposable wipes to wipe down up to 40 square feet of surface area before changing to a new wipe cloth. Each wipe cloth is compared to a “cleaning verification” card – a photograph of a used wipe. If the job-site wipe is whiter than the photograph, the job site passes the cleaning verification inspection. If the wipe is darker, the job site fails and must be cleaned again.
In some cases, an independent certified lead inspector or risk assessor must do the wipe testing.
Paperwork
Posted at the job site must be warning signs, copies of the certified firm’s and certified renovator’s certificates as well as written documentation that non-certified workers were trained by the certified renovator. This jobsite paperwork must be saved for three years.
Besides the above, the following written documents must also be saved for each job for three years: designation of a certified renovator to the specific job; information on the use and results of EPA-approved lead test kits to determine which surfaces have lead; any official lead inspections; proof of the pre-renovation education of the owner or occupants (handing out the “Renovate Right” pamphlet); any “opt-out” certification by the owner or occupant, if allowed; and any other signed and dated documents, such as contracts, regarding the job.
This paperwork requirement may be the way that the EPA traps property owners for violations of the new rules. If you don’t keep the paperwork or don’t have it, there’s no proof you followed the rules. That’s a $37,500 fine per violation per day!
If you would like the chance to work with me or one of my fellow real estate investor coaches and our advanced training programs, give us a call anytime to see if Dean's Real Estate Success Academy and our customized curriculum is a fit for you. Call us at 1-877-219-1474 ext. 125